IDBridge CR30 is the ultimate step for multiple smart card reader architectures. Thanks to Gemalto knowhow in silicon conception and to 15 years of experience in development of readers, the Gemalto technology now reaches the highest level of integration. IDBridge CR30 is a single chip product dedicated to applications requiring quick time-to-market, performances, EMVCo Type Approval and/or multiple interface capibilities
Whether EMVCo is mandatory for your application or not, the IDBridge CR30 is recommended for any systems needing to interface with smart cards and which is requiring small footprint, quick time to market and optionally up to 2 smart card interfaces. Typical applications are payment, security and identity.
> ISO/IEC 7816-1, 2, 3, 4:Integrated circuit cards withcontacts
> EMV Level 1: EMV2000 specifications version 4.2
> PC/SC part 10 compliance
> WHQL compliance
> PBOC compliance
> RoHS and REACH
Supported smart cards Asynchronous • Microprocessor cards • T=0, T=1 protocols • Transmission rate: up to 826 Kbps (TA1=17@ CK=4.8MHz) Synchronous • Through the Command Interpreter Smart card electrical interface Smart card power supply • 5V and 3V and 1.8V • Short circuit current limitation • Power up / power down control sequences Smart card management • 8 KV contact ESD protection on card I/O • 8 KV contact GemCore chip power supply Voltage • 4.6 V to 5.4 V Power down • Less than 500 μA power down current Serial host interface Serial asynchronous link • Transmission rate: 9.6 Kbps to 115 Kbps • Format: 8 bits, no parity Communication protocol • CCID V1.0 on serial TTL link USB host interface USB 2.0 compliant • CCID V1.1 • Full speed 12Mbps, hubless • Multi-slot driver for Windows Other features Temperature range • Operating range: 0°C to +70°C • Storage: -65°C to +150°C Packaging • QFN24 component package Environmental • RoHS and REACH compliant