The Test SIM Simulator is an integral part of the test setup offered by vendors of network test equipment. This new solution enables 100% test automation of network protocol conformance testing. Based on the IT³ Prove! terminal tester (hardware and software), it replaces the physical test SIM card through a simulation. Thus, different UICC profiles (CSIM, USIM, ISIM) needed for the different network access technologies (2G/GSM, UMTS/W-CDMA, CDMA2000, LTE) can be simulated.
Connectivity Test Center is COMPRION‘s test case management software for testing smart cards, secure elements (on chip), and all entities that are required for remote provisioning (RSP) of an embedded SIM.
With the Network Bridge, remote SIM provisioning scenarios can be processed in a lab environment independent of a real network, network simulator, or device. It allows end-to-end testing with just the eUICC and the subscription manager by “bridging” the complete over-the-air communication (cellular network) and providing appropriate simulations.
The modular tool for efficient eUICC life cycle management.
The eUICC Profile Manager enables users to manage embedded SIMs (eUICCs) throughout their entire life cycle.
With eUICC Profile Manager supporting M2M as well as consumer device eUICCs, you can load profiles to eUICCs, enable and disable profiles, and delete profiles. A easy user interface hides the complex RSP (remote SIM provisioning) architecture
that is required for execution of the corresponding procedures. In addition, eUICC Profile Manager scans the contents of an enabled profile, visualizes the file system, allows editing, and visualizes the sent and received commands in a sequence diagram or protocol view.
RSP (remote SIM provisioning) M2M Platform and RSP (remote SIM provisioning) Consumer Devices Platform enable you to set up a complete remote SIM provisioning infrastructure in a lab environment around the eUICC. The off -card interfaces of both
platforms are accessed using appropriate web services.
Unique modular approach to create use-case-specific OTA test solutionsTesting the OTA functionality of all involved components, covering the complete communication chain:
The most popular conformance test platform for the UICC interface of mobile devices
In the future, we will see more and more M2M devices with an eSIM. To ensure that switching to another MNO and the related Remote SIM Provisioning (RSP) work reliably, Smartjac is introducing a test eSIM (also known as test eUICC) for the M2M architecture. This enables mobile network operators and infrastructure suppliers to test the interoperability of the included components in the eUICC M2M environment during product development and integration.
Move 2 is a comprehensive trace tool covering all UICC interfaces of mobile phones and terminals.
Move 2 speeds up the analysis by help of clearly arranged views of all relevant communication layers. Together with CLT Move the synchronized monitoring of contact-based and contactless communication allows CLF testing of NFC-enabled mobile phones.
MiniMove is ultra compact trace tool for contact-based UICC interfaces. Although it is
extremely small it supports all protocols: ISO/IEC 7816, SWP/HCI, IC-USB.
In the future, we will see more and more consumer devices with an eSIM. To ensure that switching to another MNO and the related Remote SIM Provisioning (RSP) work reliably, Smartjac is introducing a test eSIM (also known as test eUICC) for the consumer device architecture. This enables mobile network operators and infrastructure suppliers to test the interoperability of the included components in the eUICC consumer device environment during product development and integration.
Prove 2 enables terminal testing on all interfaces: ISO/IEC 7816, SWP/HCI, IC-USB. The comprehensive terminal test tool for all smart card interfaces GCF/PTCRB pre-conformance platform EMVCo Electrical Terminal L1 pre-approval platform Combined synchronized testing of contact-based and contactless interfaces (with CL Verify A) Automated handset testing in combination with network simulators (COMPRION SIMfony) Communication tracing on all UICC contacts(ISO/IEC 7816, SWP/HCI, IC-USB) Integrated oscilloscope and powerful analyzers for timing measurements and error identification.
IT³ Prove! is your tool for pre-conformance testing as it is able to perform the same digital test cases used by UT³ Platform for device certification at GCF and PTCRB. Additionally, it is a cost-effective solution for regression testing of mobile phones.
TraceCase Toolbox
Command-Line Tools for TraceCase Remote Control
The slick tracer for contactless transactions
Discreetly trace contactless transactions in the field without disrupting daily business
Simple setup and handling
Capture and analyze digital and even analog data
EMV translator for detailed analysis of payment transactions in Application Layer.